|
|
| |
B
O
A
R
D
S | Q: | How do I know what size board to get? | | A: | Each board is custom made to suit your weight height and ability |
|
| |
B
O
A
R
D
S | Q: | What are Carbon Fibre rails & will I need it? | | A: | Carbon Fibre Rails or Carbon Fibre Reinforcement is used it the sensitive rail area of your board to help resist impact. If you are rough and tough with that area of your board then it's definately for you |
|
| |
B
O
A
R
D
S | Q: | What is a Rail Groove & will I need it | | A: | A rail Groove is a hand grip inserted in the rail of the board to assist in carrying the board and to hold the board while starting a race |
|
| |
B
O
A
R
D
S | Q: | What is an Extra Front Handle & will I need it? | | A: | A Extra Front Handle gives the paddler a more balanced position to drag the board during transitions and while finishg the race |
|
| |
B
O
A
R
D
S | Q: | Why do you put red warning sticks on the back of your boards? | | A: | The warning logo is to Alert the user to delamination or damage which may occur on exposure to sunlight or heat the surface temperature particularly, on dark coloured boards. The temperature can reach over 60 degrees at which point the EPS core can soften and the gas expansion within the board will cause delamination |
|
| |
B
O
A
R
D
S | Q: | Why do all boards have boxed fins? | | A: | To aid in transport and to give slight adjustment variations to the paddlers fin to suit the preference of the individual |
|
| |
B
O
A
R
D
S | Q: | What does a basic board come with? | | A: | A basic board comes with front and rear handles, kneepads, box fin and a plain or basic design |
|
| |
B
O
A
R
D
S | Q: | Are all the boards hand crafted? | | A: | Yes they are and they are hand made right here in our Factory at Kunda Park |
|
| |
B
O
A
R
D
S | Q: | Are there any computers or machines involved in making the board? | | A: | NO, but we do have computer programs to aid in design changes |
|
| |
B
O
A
R
D
S | Q: | What is the clear tape you put on the tail corners of all your new boards? | | A: | The clear Tape is put on the Tail of every board to protect it while the board is being dragged in the transitions and finishes |
|
|
B
O
A
R
D
S | Q: | What is a Gloss finish? | | A: | A Gloss Finish is a two pack paint to add toughness and high sheen to the finish |
|
|
